Product Details:
| Power | 300 W |
| Channel | 1 Chennel |
| Brand | JBL |
| Model Name/Number | Libra 300 |
| Color | Black |
| Voltage | 240 V |
| Frequency | 50 Hz |
JBL LIBRA 300 WATT 6 MIC LINE INPUT INBUILT USB WITH BLUTOOTH 2 AUX
Product Details:
| No. of Channels | 4 |
| Color | Black |
| Brand | Bose |
| Model | PowerMatch PM4500N |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) at 1 W |
| Gain, High-Impedance | 42 dB |
| Maximum Peak Power, Symmetrical | 1000 W |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Net Weight | 24.4 lb (11.1 kg) |
| Operating Temperature | 0 to 40 Deg C |
The Bose Professional PowerMatch PM4500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
Product Details:
| No. of Channels | 8 |
| Color | Black |
| Brand | Bose |
| Model | PowerMatch PM8250N |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) at 1 W |
| Gain, High-Impedance | 42 dB |
| Maximum Peak Power, Symmetrical | 500 W |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Power Consumption | 31 W standby (idle), 176 W awake (idle), 975 W maximum |
| Net Weight | 28.4 lb (12.9 kg) |
| Operating Temperature | 0 to 40 Deg C |
The Bose Professional PowerMatch PM8250N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
Product Details:
| No. of Channels | 4 |
| Brand | Bose |
| Model | PowerSpace P4150+ |
| Gain, High-Impedance | 35 dB, 70V mode / 38 dB, 100V mode |
| Maximum Peak Power, Symmetrical | 300 W |
| Gain, Low-Impedance | 29 dB |
| Mains Voltage | 100 - 240 VAC (+/-10%), 50/60 Hz |
| Power Consumption | 25 W auto-standby, 325 W maximum |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 14.6 lb (6.6 kg) |
The Bose Professional PowerSpace P4150+ amplifier combines power and DSP into a 1RU, four-channel design for quick-turn installations. Part of a comprehensive platform of loudspeakers, controls, and software that help installers deliver premium commercial sound systems efficiently, Bose Professional PowerSpace+ amplifiers feature a quick-setup workflow. An onboard configuration utility and intuitive browser-based UI present common tasks in a logical manner, so you can configure the system faster, reducing installation time while increasing setup accuracy. Once installed, proprietary algorithms offer predictable performance while optional interfaces — such as ControlCenter analog zone controllers — make operation easy for end users. For premium commercial applications, Bose Professional PowerSpace+ models provide amplification and DSP in one integrated, easy-to-configure package.
150 watts per channel and works seamlessly with Bose Professional loudspeakers and controls to create complete commercial sound systems
Built-in DSP, including SmartBass processing, routing, level control, delays, limiters, Bose Professional loudspeaker EQs, plus input and area EQs
PowerSpace configuration utility facilitates setup with an integrated webserver and intuitive browser-based UI, including real-time control with signal and thermal monitoring
Opti-Voice paging provides a smooth transition between music and announcements
Integrated features to simplify commercial installations: Dedicated input for 600 Ω telephone or mic paging, independent 600 Ω music-on-hold and line-level aux outputs, and a NO/NC mute connection
Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
I-Share outputs deliver 2x power level by combining the current of two channels
Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Intuitive end-user operation — optional ControlCenter CC-1, CC-2, and CC-3 analog zone controllers provide easy volume control and source selection
Product Details:
| No. of Channels | 4 |
| Brand | Bose |
| Model | PowerSpace P4300A |
| Gain, High-Impedance | 35 dB, 70V mode / 38 dB, 100V mode |
| Maximum Peak Power, Symmetrical | 600 W |
| Rated Power, Symmetrical | 300 W |
| Mains Voltage | 100 - 240 VAC (+/-10%), 50/60 Hz |
| Power Consumption | 25 W auto-standby, 570 W maximum |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 14.6 lb (6.6 kg) |
Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P4300A provides 300 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.
300 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems
AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
I-Share outputs deliver 2x power level by combining the current of two channels
Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Designed for a wide range of applications, including:
Retail stores
Restaurants and bars
Hospitality venues
Conference centers
Schools
Auxiliary zones
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | PowerSpace P2600A |
| Gain, High-Impedance | 35 dB, 70V mode / 38 dB, 100V mode |
| Gain, Low-Impedance | 35 dB |
| Maximum Peak Power, Symmetrical | 1200 W |
| Rated Power, Symmetrical | 600 W |
| Mains Voltage | 100 - 240 VAC (+/-10%), 50/60 Hz |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 13.7 lb (6.2 kg) |
Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.
600 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems
AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
I-Share outputs deliver 2x power level by combining the current of two channels
Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | PowerSpace P21000A |
| Gain, High-Impedance | 35 dB, 70V mode / 38 dB, 100V mode |
| Gain, Low-Impedance | 38 dB |
| Mains Voltage | 100 - 240 VAC (+/-10%), 50/60 Hz |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 14.6 lb (6.6 kg) |
| Maximum Peak Power, Symmetrical | 2000 W |
| Rated Power, Symmetrical | 1000 W |
Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P21000A provides 1000 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.
1000 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems
AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
I-Share outputs deliver 2x power level by combining the current of two channels
Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Product Details:
| No. of Channels | 4 |
| Brand | Bose |
| Model | PowerMatch PM4500N |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) at 1 W |
| Gain, High-Impedance | 42 dB |
| Maximum Peak Power, Symmetrical | 1000 W |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Power Consumption | 31 W standby (idle), 114 W awake (idle), 908 W maximum |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 24.4 lb (11.1 kg) |
The Bose Professional PowerMatch PM4500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
Designed for a wide range of applications, including:
Auditoriums
Performing arts venues
Theaters
Houses of worship
Arenas
Hospitality venues
Product Details:
| Brand | Bose |
| Model | PowerMatch PM8250N |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) at 1 W |
| Gain, High-Impedance | 42 dB |
| Maximum Peak Power, Symmetrical | 500 W |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Power Consumption | 31 W standby (idle), 176 W awake (idle), 975 W maximum |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 28.4 lb (12.9 kg) |
The Bose Professional PowerMatch PM8250N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
Product Details:
| No. of Channels | 8 |
| Brand | Bose |
| Model | PowerMatch PM8500N |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) at 1 W |
| Gain, High-Impedance | 42 dB |
| Maximum Peak Power, Symmetrical | 1000 W |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Power Consumption | 31 W standby (idle), 176 W awake (idle), 1789 W maximum |
| Net Weight | 28.4 lb (12.9 kg) |
| Operating Temperature | 0 to 40 Deg C |
The Bose Professional PowerMatch PM8500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
Product Details:
| No. of Channels | 8 |
| Brand | Bose |
| Model | PowerMatch PM8500N |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) at 1 W |
| Gain, High-Impedance | 42 dB |
| Maximum Peak Power, Symmetrical | 1000 W |
| Mains Voltage | 100 - 240 VAC, 50/60 Hz |
| Power Consumption | 31 W standby (idle), 176 W awake (idle), 1789 W maximum |
| Operating Temperature | 0 to 40 Deg C |
| Net Weight | 28.4 lb (12.9 kg) |
The Bose Professional PowerMatch PM8500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
Product Details:
| Power | 250 W |
| Brand | Bose |
| Packaging Type | Box |
| Model | IZA 250-LZ |
| Dynamic Range | 88 dB |
| Frequency Response | 40 Hz - 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference |
| Maximum Input Level | +10 dBV |
| Voltage | 100 - 240 VAC (+/-10%) |
| Frequency | 50/60 Hz |
| Power Consumption | 15 W idle, 200 W maximum |
| Net Weight | 4.8 lb (2.2 kg) |
For background/foreground music and paging applications, the Bose Professional FreeSpace IZA 250-LZ and IZA 190-HZ integrated zone amplifiers are designed to deliver premium sound, provide simplified set up and easy daily operation, and offer the flexibility to expand when more loudspeakers are required. When used with FreeSpace FS2 and FS4 loudspeakers, even further sound optimization is possible through onboard selectable EQ presets.
Amplification for premium sound from a reliable, high quality Class-D amplifier provides optimized performance and premium sound quality through the use of internal digital signal processing
Installation made simple with set up done locally from the front and rear panels of the amplifier—no computer is required
Opti-Voice paging provides smooth automatic transition between the music and page signals
End-user friendly front panel allows users to connect devices easily, make tonal adjustments or select between two sources. Optional wall mountable Bose Professional Volume control with A/B switch user interface allows volume and source selection controls to be placed away from the amplifier for user convenience
Compact, lightweight design enables the FreeSpace integrated zone amplifier to be placed out of the way—on a table, desk, counter, shelf or in an equipment rack using the optional Rack Mount Kit accessory
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | FreeSpace IZA 2120-HZ |
| Dynamic Range | 88 dB |
| Frequency Response | 55 Hz - 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference |
| Rated Power, Symmetrical | 120 W per channel at 70V, 100V |
| Mains Voltage | 100 - 240 VAC (+-10%), 50/60 Hz |
| Power Consumption | 26 W standby, 300 W maximum |
| Net Weight | 9.0 lb (4.1 kg) |
For background/foreground music and paging applications, Bose Professional FreeSpace IZA 2120-HZ integrated zone amplifier elevates the audio experience when using FreeSpace loudspeakers. Optimized for commercial applications, FreeSpace IZA amplifiers feature selectable Loudspeaker EQ to enrich audio quality, Opti-Voice paging for clear speech intelligibility while providing seamless transitions and Dynamic EQ that ensures full and balanced music at any volume level.
True two-zone capability provides two independent outputs that each support volume/source selection remotes, EQ, tone controls, and paging/auxiliary routing options
Opti-Voice paging equalizes the vocal frequency range for clear speech intelligibility while providing seamless transitions
Dynamic EQ ensures full and balanced music at any volume level
Independent Loudspeaker EQ per output enriches audio quality and simplifies connection to Bose Professional loudspeakers: FreeSpace 3 systems, FS3 subwoofer, FS2, FS4 and DesignMax DM2
Dual remotes support optional volume/source selection for independent, or combined, zone control which eliminates the need for bulky, inefficient, and sound-altering 70/100V in-line volume controls
Reliable 2 × 120 W Class-D amplification optimized for 70/100V high-impedance applications
Intuitive feature setup enables the amplifier to be configured without a PC for remote, paging, auxiliary input/output and automatic standby options
Auto-Standby feature allows the amplifier to consume less power when not in use
Simplified front panel interface provides end users with tone, source selection and master volume controls as well as a connection to mobile sources via a 3.5 mm connector
Remote muting allows the amplifier to be muted via a centralized control system
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | FreeSpace IZA 190-HZ |
| Dynamic Range | 88 dB |
| Frequency Response | 60 Hz - 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference |
| Maximum Input Level | +10 dBV |
| Mains Voltage | 100 - 240 VAC (+/-10%), 50/60 Hz |
| Power Consumption | 15 W idle, 200 W maximum |
| Net Weight | 7.0 lb (3.2 kg) |
| Dimensions | 45 x 214 x 310 mm |
For background/foreground music and paging applications, the Bose Professional FreeSpace IZA 250-LZ and IZA 190-HZ integrated zone amplifiers are designed to deliver premium sound, provide simplified set up and easy daily operation, and offer the flexibility to expand when more loudspeakers are required. When used with FreeSpace FS2 and FS4 loudspeakers, even further sound optimization is possible through onboard selectable EQ presets.
Amplification for premium sound from a reliable, high quality Class-D amplifier provides optimized performance and premium sound quality through the use of internal digital signal processing
Installation made simple with set up done locally from the front and rear panels of the amplifier—no computer is required
Opti-Voice paging provides smooth automatic transition between the music and page signals
End-user friendly front panel allows users to connect devices easily, make tonal adjustments or select between two sources. Optional wall mountable Bose Professional Volume control with A/B switch user interface allows volume and source selection controls to be placed away from the amplifier for user convenience
Compact, lightweight design enables the FreeSpace integrated zone amplifier to be placed out of the way—on a table, desk, counter, shelf or in an equipment rack using the optional Rack Mount Kit accessory
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | FreeSpace IZA 2120-HZ |
| Dynamic Range | 88 dB |
| Frequency Response | 55 Hz - 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference |
| Rated Power, Symmetrical | 120 W per channel at 70V, 100V |
| Mains Voltage | 100 - 240 VAC (+-10%), 50/60 Hz |
| Power Consumption | 26 W standby, 300 W maximum |
| Net Weight | 9.0 lb (4.1 kg) |
For background/foreground music and paging applications, Bose Professional FreeSpace IZA 2120-HZ integrated zone amplifier elevates the audio experience when using FreeSpace loudspeakers. Optimized for commercial applications, FreeSpace IZA amplifiers feature selectable Loudspeaker EQ to enrich audio quality, Opti-Voice paging for clear speech intelligibility while providing seamless transitions and Dynamic EQ that ensures full and balanced music at any volume level.
True two-zone capability provides two independent outputs that each support volume/source selection remotes, EQ, tone controls, and paging/auxiliary routing options
Opti-Voice paging equalizes the vocal frequency range for clear speech intelligibility while providing seamless transitions
Dynamic EQ ensures full and balanced music at any volume level
Independent Loudspeaker EQ per output enriches audio quality and simplifies connection to Bose Professional loudspeakers: FreeSpace 3 systems, FS3 subwoofer, FS2, FS4 and DesignMax DM2
Dual remotes support optional volume/source selection for independent, or combined, zone control which eliminates the need for bulky, inefficient, and sound-altering 70/100V in-line volume controls
Reliable 2 × 120 W Class-D amplification optimized for 70/100V high-impedance applications
Intuitive feature setup enables the amplifier to be configured without a PC for remote, paging, auxiliary input/output and automatic standby options
Auto-Standby feature allows the amplifier to consume less power when not in use
Simplified front panel interface provides end users with tone, source selection and master volume controls as well as a connection to mobile sources via a 3.5 mm connector
Remote muting allows the amplifier to be muted via a centralized control system
Designed for a wide range of applications, including:
Retail stores
Restaurants and bars
Hospitality venues
Conference centers
Schools
Auxiliary zones
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | FreeSpace IZA 190-HZ |
| Dynamic Range | 88 dB |
| Frequency Response | 60 Hz - 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference |
| Rated Power, Symmetrical | 90 W at 70V, 100V |
| Mains Voltage | 100 - 240 VAC (+-10%), 50/60 Hz |
| Power Consumption | 15 W idle, 200 W maximum |
| Net Weight | 7.0 lb (3.2 kg) |
For background/foreground music and paging applications, the Bose Professional FreeSpace IZA 250-LZ and IZA 190-HZ integrated zone amplifiers are designed to deliver premium sound, provide simplified set up and easy daily operation, and offer the flexibility to expand when more loudspeakers are required. When used with FreeSpace FS2 and FS4 loudspeakers, even further sound optimization is possible through onboard selectable EQ presets.
Amplification for premium sound from a reliable, high quality Class-D amplifier provides optimized performance and premium sound quality through the use of internal digital signal processing
Installation made simple with set up done locally from the front and rear panels of the amplifier—no computer is required
Opti-Voice paging provides smooth automatic transition between the music and page signals
End-user friendly front panel allows users to connect devices easily, make tonal adjustments or select between two sources. Optional wall mountable Bose Professional Volume control with A/B switch user interface allows volume and source selection controls to be placed away from the amplifier for user convenience
Compact, lightweight design enables the FreeSpace integrated zone amplifier to be placed out of the way—on a table, desk, counter, shelf or in an equipment rack using the optional Rack Mount Kit accessory
Product Details:
| Color | Black |
| Weight | 14.2 kg |
| Brand | Marantz |
| Model | MODEL 50 |
| Power Output (8 / 4 Ohm RMS) | 70 W / 100 W |
| Frequency Response | 5 Hz - 100 kHz |
| Maximum Dimensions | 442 x 431 x 130 mm (W x D x H) |
| Remote Control | RC003PMND |
MODEL 50 is the ideal integrated amplifier. With 70 watts per channel of unique Marantz current- feedback power and HDAM SA-3 circuitry, this amplifier drives loudspeakers with total control.
Product Details:
| Brand | Marantz |
| Model | MODEL 30 |
| Dimension | 443 x 130 x 432 mm |
| Net weight | 14.8 kg |
| Power Consumption | 130 W |
| Wide Range | 5 Hz - 50 kHz |
| Packaging Type | Box |
Get the most musical sound possible from this Master-tuned integrated amplifier. Its custom-designed HDAM delivers exquisite detail and unforgettable musicality from any style of music.
Product Details:
| No. of Channels | 2 |
| Brand | Bose |
| Model | FreeSpace IZA 250-LZ |
| Dynamic Range | 88 dB |
| Frequency | 40 Hz - 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference |
| Mains Voltage | 100 - 240 VAC (+-10%), 50/60 Hz |
| Power Consumption | 15 W idle, 200 W maximum |
| Dimensions | 45 x 214 x 310 mm |
| Net Weight | 4.8 lb (2.2 kg) |
For background/foreground music and paging applications, the Bose Professional FreeSpace IZA 250-LZ and IZA 190-HZ integrated zone amplifiers are designed to deliver premium sound, provide simplified set up and easy daily operation, and offer the flexibility to expand when more loudspeakers are required. When used with FreeSpace FS2 and FS4 loudspeakers, even further sound optimization is possible through onboard selectable EQ presets.
Amplification for premium sound from a reliable, high quality Class-D amplifier provides optimized performance and premium sound quality through the use of internal digital signal processing
Installation made simple with set up done locally from the front and rear panels of the amplifier—no computer is required
Opti-Voice paging provides smooth automatic transition between the music and page signals
End-user friendly front panel allows users to connect devices easily, make tonal adjustments or select between two sources. Optional wall mountable Bose Professional Volume control with A/B switch user interface allows volume and source selection controls to be placed away from the amplifier for user convenience
Compact, lightweight design enables the FreeSpace integrated zone amplifier to be placed out of the way—on a table, desk, counter, shelf or in an equipment rack using the optional Rack Mount Kit accessory
Product Details:
| Power | 300 W |
| Noise Level (SNR) | 95 dB |
| Weight | 7.5 kg |
| Country of Origin | Made in India |
| Brand | QSC |
| Model | GX3 |
| Voltage | 230 V |
| Mounting Type | Surface Mount |
| Dimensions | 40.6 x 48.3 x 10.2 cm |