Commercial Mixer Amplifiers

Product Details:

Innovation is always evident throughout the JBL Commercial Series product lineup, and our new high-performance, energy-efficient Commercial Series Mixer-Amplifiers (CSMA) represents the latest example.

Manufactured using HARMAN’ s Green Edge™ clean standards, including a low-energy powder coat that uses 33% less energy, CSMA units conform to lead-free RoHS standards. By incorporating Crown’s exclusive DriveCore technology, they also deliver unsurpassed reliability, thermal management and power efficiency.

Offering unmatched ease of use and driving 8 ohm and 4 ohm loads, CSMA units include balanced mic/line inputs, unbalanced RCA inputs and speaker connections, and RJ45 connectors to use with JBL CSR-V in-wall volume controls.

• Fanless, space-saving 1U design
• Configurable output routing (2 channel only) Independent bass/ treble controls for each output channel Euro-block type mic/ line input and output connectors, and unbalanced RCA inputs for
• consumer connection
• Supports 70V and 100V distributed audio systems without needing a separate transformer
• Remote volume control capability using JBL CSR-V module and standard Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models

Product Details:

Innovation is always evident throughout the JBL Commercial Series product lineup, and our new high-performance, energy-efficient Commercial Series Mixer-Amplifiers (CSMA) represents the latest example.

Manufactured using HARMAN’ s Green Edge™ clean standards, including a low-energy powder coat that uses 33% less energy, CSMA units conform to lead-free RoHS standards. By incorporating Crown’s exclusive DriveCore technology, they also deliver unsurpassed reliability, thermal management and power efficiency.

Offering unmatched ease of use and driving 8 ohm and 4 ohm loads, CSMA units include balanced mic/line inputs, unbalanced RCA inputs and speaker connections, and RJ45 connectors to use with JBL CSR-V in-wall volume controls.

• Fanless, space-saving 1U design
• Configurable output routing (2 channel only) Independent bass/ treble controls for each output channel Euro-block type mic/ line input and output connectors, and unbalanced RCA inputs for
• consumer connection
• Supports 70V and 100V distributed audio systems without needing a separate transformer
• Remote volume control capability using JBL CSR-V module and standard Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models

Product Details:

Innovation is always evident throughout the JBL Commercial Series product lineup, and our new high-performance, energy-efficient Commercial Series Mixer-Amplifiers (CSMA) represents the latest example.

Manufactured using HARMAN’ s Green Edge™ clean standards, including a low-energy powder coat that uses 33% less energy, CSMA units conform to lead-free RoHS standards. By incorporating Crown’s exclusive DriveCore technology, they also deliver unsurpassed reliability, thermal management and power efficiency.

Offering unmatched ease of use and driving 8 ohm and 4 ohm loads, CSMA units include balanced mic/line inputs, unbalanced RCA inputs and speaker connections, and RJ45 connectors to use with JBL CSR-V in-wall volume controls.

• Fanless, space-saving 1U design
• Configurable output routing (2 channel only) Independent bass/ treble controls for each output channel Euro-block type mic/ line input and output connectors, and unbalanced RCA inputs for
• consumer connection
• Supports 70V and 100V distributed audio systems without needing a separate transformer
• Remote volume control capability using JBL CSR-V module and standard Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models

Product Details:

Innovation is always evident throughout the JBL Commercial Series product lineup, and our new high-performance, energy-efficient Commercial Series Mixer-Amplifiers (CSMA) represents the latest example.

Manufactured using HARMAN’ s Green Edge™ clean standards, including a low-energy powder coat that uses 33% less energy, CSMA units conform to lead-free RoHS standards. By incorporating Crown’s exclusive DriveCore technology, they also deliver unsurpassed reliability, thermal management and power efficiency.

Offering unmatched ease of use and driving 8 ohm and 4 ohm loads, CSMA units include balanced mic/line inputs, unbalanced RCA inputs and speaker connections, and RJ45 connectors to use with JBL CSR-V in-wall volume controls.

• Fanless, space-saving 1U design
• Configurable output routing (2 channel only) Independent bass/ treble controls for each output channel Euro-block type mic/ line input and output connectors, and unbalanced RCA inputs for
• consumer connection
• Supports 70V and 100V distributed audio systems without needing a separate transformer
• Remote volume control capability using JBL CSR-V module and standard Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models

Product Details:

The JBL® Commercial Series CSM-21 and CSM-32 Mixers offer a wide array of processing tools, including priority override, page ducking, source and zone EQ, and a built-in crossover.
Helping maintain optimum levels through the system, LevelGuard™ automatically applies the right amount of compression to the source signals based upon the incoming level.
AutoWarmth™ automatically adjusts the tonal balance within a zone based upon the zone output level, preventing music from sounding thin at lower levels or excessively resonant at higher levels.

• Fanless, space-saving 1U design
• Independent base/treble controls
• Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection
• Sleek industrial look with illuminated rings making them easy to see and use
• Configurable output routing (2 channel models only)
• Supports JBL CSR-V wall controller via Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models

Product Details:

The JBL® Commercial Series CSM-21 and CSM-32 Mixers offer a wide array of processing tools, including priority override, page ducking, source and zone EQ, and a built-in crossover.
Helping maintain optimum levels through the system, LevelGuard™ automatically applies the right amount of compression to the source signals based upon the incoming level.
AutoWarmth™ automatically adjusts the tonal balance within a zone based upon the zone output level, preventing music from sounding thin at lower levels or excessively resonant at higher levels.

• Fanless, space-saving 1U design
• Independent base/treble controls
• Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection
• Sleek industrial look with illuminated rings making them easy to see and use
• Configurable output routing (2 channel models only)
• Supports JBL CSR-V wall controller via Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models

Product Details:

The JBL® Commercial Series CSM-21 and CSM-32 Mixers offer a wide array of processing tools, including priority override, page ducking, source and zone EQ, and a built-in crossover.
Helping maintain optimum levels through the system, LevelGuard™ automatically applies the right amount of compression to the source signals based upon the incoming level.
AutoWarmth™ automatically adjusts the tonal balance within a zone based upon the zone output level, preventing music from sounding thin at lower levels or excessively resonant at higher levels.

Product Details:

The JBL® Commercial Series CSM-21 and CSM-32 Mixers offer a wide array of processing tools, including priority override, page ducking, source and zone EQ, and a built-in crossover.
Helping maintain optimum levels through the system, LevelGuard™ automatically applies the right amount of compression to the source signals based upon the incoming level.
AutoWarmth™ automatically adjusts the tonal balance within a zone based upon the zone output level, preventing music from sounding thin at lower levels or excessively resonant at higher levels.

Product Details:

Innovation is always evident throughout the JBL Commercial Series product lineup, and our new high-performance, energy-efficient Commercial Series Mixer-Amplifiers (CSMA) represents the latest example.

Manufactured using HARMAN’ s Green Edge™ clean standards, including a low-energy powder coat that uses 33% less energy, CSMA units conform to lead-free RoHS standards. By incorporating Crown’s exclusive DriveCore technology, they also deliver unsurpassed reliability, thermal management and power efficiency.

Offering unmatched ease of use and driving 8 ohm and 4 ohm loads, CSMA units include balanced mic/line inputs, unbalanced RCA inputs and speaker connections, and RJ45 connectors to use with JBL CSR-V in-wall volume controls.

• Fanless, space-saving 1U design
• Configurable output routing (2 channel only) Independent bass/ treble controls for each output channel Euro-block type mic/ line input and output connectors, and unbalanced RCA inputs for
• consumer connection
• Supports 70V and 100V distributed audio systems without needing a separate transformer
• Remote volume control capability using JBL CSR-V module and standard Ethernet cable
• Priority muting, VOX ducking, and phantom power for all models